2WF Electroslag Wire Feeder Module PDF Print E-mail

(16) VS-2WF (Two-Wire Feeder)
Wire Feeder

Arcmatic's Brute-Force 2-Wire Feeder can pull one or two wires at the same time.


The Arcmatic dual-wire feeder is unlike any wire feeder in the welding industry. Each wire has two idler rolls – one on the top and one on the bottom of the drive roll. As the operator turns the hand wheel to force the welding wire into the V-groove of the drive roll, the top idler pulls against the bottom idler to equalize the pressure against the drive roll. This equalized pressure eliminates any deflection of the drive roll shaft that causes wire slippage. Eliminating slippage allows all four welding wires to feed at exactly the same speed at all times.

View it in Action - 1

....... {flv width="200" height="180"}miniDarrenTWF-1{/flv}




Stiffener Welder Modules

Contact Us for More Information

Email: Keith Zimmerman or Call Him for More Information Tel: 707-643-5517 or 707-552-3232 Keith@arcmatic.com Sales@arcmatic.com  
Visits TodayVisits Today35
This weekThis week99
This monthThis month2076