VERTASLAG (ELECTROSLAG)
Arcmatic has the only welding system specifically designed to produce NGI-ESW welds.
|
Portable Electroslag system. Easy to move - small and compact. Can be moved by hand, forklift or crane Must have in every steel shop. |
![]() |
Arcmatic's newest design: Two in One Subarc Manipulator and Electroslag unit. 5 minutes to switch between Subarc and Electroslag welds. Optional - can be added and pipe rotation control and use it as welding direction |
This newly developed welding system combines our tremendous electroslag welding
experience with the repeatability and precision of computer controlled welding system.
We control all aspects of the weld. The main futures for this system are:
• Up to 12” thick welds in single pass.
• Precise timing for every welding stage
• Voltage Amps (Wire Feeder) control and automated changes following the welding parameters.
• Power supply control and instant record of Amps and Volts during the weld. This is required
by D1.5 2010 code Option to replay the weld information later on.
• Flux dispersing. The error is less the 1% for the entire weld
• Automatic Welding parameters generator
• Storing the welding programs for future use
• Power supply control and instant record of Amps and Volts during the weld.
This is required by D1.5 2010 code Option to replay the weld information later on.
• 40 000 BTU water cooler with automatic sense for the water flow as safety future
• Specially design water cooled copper shoes.
• Options for 1,2,3 or 4 wire welds.